A fridge that's running (you can hear the compressor) but not actually cooling is confusing — and the cause can range from a two-minute fix to something that needs a technician. Here's how to narrow it down.
Check the thermostat setting first
It sounds obvious, but the thermostat dial can get accidentally bumped, especially in busy kitchens. Make sure it's set to a mid-range cooling level and give it a few hours to stabilise.
Look at the door seal
A worn or loose door gasket lets cold air escape continuously, forcing the compressor to run constantly without ever reaching the set temperature. Run a piece of paper along the seal — if it slides out easily, the seal needs replacing.
Clean the condenser coils
Dust buildup on the coils at the back or bottom of the fridge is extremely common, especially in Moradabad's dustier seasons, and it directly reduces cooling efficiency.
When it needs a technician
If the compressor isn't running at all, you hear clicking sounds, or cooling doesn't improve after the checks above, the issue is likely with the compressor, gas charge, or wiring — this needs a professional diagnosis rather than a DIY fix.
A Seerua technician in Moradabad can inspect the gas pressure, compressor, and wiring in one visit, with the exact repair cost shared before any work begins.